欢迎进入江苏艾妮尔泰流体控制设备有限公司官网!
IMPORTED BRAND FROM ABROAD

来自国外的进口品牌—自控阀门专家

外商独资公司在中国全权授权的一级代理的中资企业 点击查看
Jiangsu Aniltai Fluid Control Equipment Co., LTD.

江苏艾妮尔泰流体控制设备有限公司

集设计,研发,生产,销售融为一体专做进口品牌工业自控阀门的集成商 点击查看

新闻动态

  • 行业新闻Industry News
  • 公司新闻Company News
  • 联系我们 CONTACT
    江苏艾妮尔泰流体控制设备有限公司 JiangSu Aniltai Fluid Control Equipment Co,.Ltd
    地址 (Address):张家港市大新镇新乐路9号  No. 9 Xinle Road, Daxin Town, Zhangjiagang City
    电话 (TEL):0512-58766008 0512-58388722
    上海公司地址 (Shanghai Address) :上海市浦东新区惠南镇东征路133号133 Dongzheng Road, Huinan Town, Pudong New Area, Shanghai
    营销服务热线(Service TEL):400-8016-966

    邮箱(Email):ainiertai@126.com

    网址(Web): www.ainiertai.com 

    行业新闻Industry News

    电动阀的结构与作用The structure and function of electric valves

    作者: 来源: 日期:2020-10-13 11:26:06 人气:2007
    电动阀的结构与作用
    随着工业的发展,电动阀的出现比气动阀晚,但其应用范围越来越广。由于不需要气源,安装使用方便。只要电源和控制信号接通,就可以工作。下面我来为您介绍电动阀的结构和功能。


    电动阀的典型形状,由两个可拆卸的执行器和一个调节阀(调节机构)组成。上部为执行机构,接收来自调节器的0-10madc或4-20madc信号,转换成相应的线性位移,推动下部调节阀动作,直接调节流体流量。各种电动阀的执行器基本相同,但调节阀(调节机构)的结构因操作条件不同而类型很多,最常用的是直通单阀座和直通双阀座。

    电动阀是由调节阀体和各种电动执行机构组成的工业现场执行仪表。接收来自调节器的4-20mA或脉冲信号,进行闭环控制,实现流量、压力、温度、液位等参数的自动控制。它还可以选用智能电动执行机构,与DCS、PLC等设备实现数字化传输,形成更加智能化的控制制造系统。电动调节阀有两种供电电压:220 V和380 V。电动阀、电动单阀座调节阀和电动小流量调节阀的流量特性是等百分比、线性、快等三种。

      The structure and function of electric valves
     With the development of industry, electric valves have emerged later than pneumatic valves, but their application scope is becoming wider and wider. Due to the lack of air supply, it is easy to install and use. As long as the power and control signals are connected, it can work. Below, I will introduce the structure and functions of electric valves to you.
    The typical shape of an electric valve consists of two detachable actuators and a regulating valve (regulating mechanism). The upper part is an actuator that receives 0-10madc or 4-20madc signals from the regulator, converts them into corresponding linear displacement, and pushes the lower regulating valve to act, directly regulating the fluid flow. The actuators of various electric valves are basically the same, but the structure of regulating valves (regulating mechanisms) varies depending on the operating conditions, with the most commonly used being through single seat and through double seat.
    Electric valve is an industrial on-site execution instrument composed of a regulating valve body and various electric actuators. Receive 4-20mA or pulse signals from the regulator for closed-loop control, achieving automatic control of parameters such as flow, pressure, temperature, and liquid level. It can also use intelligent electric actuators to achieve digital transmission with DCS, PLC and other devices, forming a more intelligent control manufacturing system. There are two types of power supply voltages for electric control valves: 220 V and 380 V. The flow characteristics of electric valves, electric single seat regulating valves, and electric small flow regulating valves are equal percentage, linear, and fast.

    下一个: 气动阀现场校准On site calibration of pneumatic valves
    © 2020 江苏艾妮尔泰流体控制设备有限公司JiangSu Aniltai Fluid Control Equipment Co,.Ltd  版权所有
    💬

    QQ

    💬

    在线咨询真诚为您提供专业解答服务

    热线

    0512-58766008
    7*24小时服务热线

    💬

    微信

    二维码扫一扫
    顶部